ZU49/ZU39/ZU29DR RFSoC System on Module

iG-G48

Zynq^TM UltraScale+^TM RFSoC family with FFVF1760 Package
Compatible with ZU49/ZU39/ZU29DR devices
8GB DDR4 RAM for PS with ECC & 8GB DDR4 RAM for PL
32GB eMMC Flash Expandable up to 128GB
16 ADC Channels support up to 2.5Gsps
16 DAC Channels support up to 10Gsps

CONTACT SALES

Design Support

SOM/SBC Selection Guide
SOM 3D STEP
Library Symbol
CAD Symbol
Carrier Schematics

Software

Linux User Manual
Linux - BSP

Features	Details
CPU	RFSoC ZU49/ZU39/ZU29DR Processing System (PS) Quad Arm Cortex-A53 @1.3GHz, Dual Cortex-R5F @533MHz Programming Logic (PL) Up to 930K Logic cells & 425K LUTs PL GTY High Speed Transceivers x 16 @28.21 Gbps
Memory	8GB DDR4 RAM for PS with ECC 8GB DDR4 RAM for PL
Storage	32GB eMMC Flash Expandable up to 128GB
Board to Board Connector1 Interfaces (400pin)	ADC: 16 x ADC Channels up to 2.5Gsps DAC: 16 x DAC Channels up to 10Gsps PL Ios: PL IOs – 188 IOs HP Bank IOs – up to 70LVDS/140SE HD Bank IOs – up to 24LVDS/48SE
Board to Board Connector2 Interfaces (400pin)	From PL Block 16 x PL-GTY High Speed Transceivers (up to 28.21Gbps) PL Control Signal From PS Block Gigabit Ethernet x 1 Port (through On-SOM Gigabit Ethernet PHY) USB 2.0 OTG x 1 (through On-SOM USB2.0 transceiver) SPI/QSPI X 1 Port (Optional) CAN x 1, I2C x 2, SD x 1 Debug UART x 1, Data UART x 1 PS JTAG RGMII Interface or ULPI Interface x 1 PS -GTR High speed Transceivers x 4 (upto 6Gbps) PS-Control Signals SYSMON(Optional) Clock signals 10MHz Clock IN 1 PPS IN 10 MHz Clock out 1 PPS Clock Out Synthesized Clock out from Clock synthesizer
General Features	Power Input: 12V through B2B Connector2 Form Factor: 100mm x 90mm (BRYN) BSP Support: Linux BSP: Petalinux/vivado 2022.1 Operating Temperature: -40°C to +85°C (Industrial Grade) Environment Specification: REACH & RoHS3 Compliant Compliance: CE*

RF DAC/ADC Specifications:

- 8 RF RT SMA connectors with Balun(BW-800MHz-1GHz)
- 8 RF ST SMA connectors with Balun(BW-800MHz-1GHz)
- 8RF ST SMA connectors with Balun(BW-700MHz-1.6GHz)
- 8 RF ST SMA connectors with Balun(BW-10MHz-3GHz)

High Speed and Interface Specifications:

- PCIe Gen3 x8 Edge Connector.
- FMC+ High Pin count(HPC) connector
- 4 SMA Straight angled connector for Clocks(10Mhz, 1PPS, SYS-CLK IN/Out)
- NVMe PCIe Gen2 x2 M.2 Connector
- Gigabit Ethernet through RJ45MagJack
- Debug & DATA UART/JTAG through Type-C Connector
- Operating Temperature: 30°C to +85°C
- Form Factor: 254mm x 111.15mm (3/4 Length PCIe Card)

Buy Now

Thermal design is a crucial factor for highly integrated System on Modules. iWave offers Heat Spreader and Fan Sink solutions for RFSoC-based SoMs to ensure optimal thermal management.